Flowline LV10 Switch-Tek Bedienungsanleitung PDF herunterladen (Seite 5)

Step Six Step Seven

WIRING ORIENTATION

Note: Above wiring is for NO operation (open cir-

cuit when switch is dry and closed circuit when

switch is wet). To wire NC (closed circuit when dry

and open circuit when wet), use RED and BLACK

wires for the LV10-_3_1 or reverse the float for the

LV10-_2_1. Use the shield to protect the cable

from electrical noise. Attach to either the Shield

terminal or the ground terminal.

Buoyancy

Float

All Models:

Wiring to a FLOWLINE Controller

LC10 Series Controller

Vertical Buoyancy Level Switch (LV10-_3_1):

The LV10-_3_1 switch can be wired normally open or normally

closed for your application requirement.

Normally Open:

Use the Black and White wires for operating the LV10-_3_1 in a nor-

mally open state. Normally open is defined as the switch being open

when the float is dry and closed when the float becomes submersed.

This operation is typical for indicating a high level.

Normally Closed:

Use the Black and Red wires for operating the LV10-_3_1 in a nor-

mally closed state. Normally closed is defined as the switch being

closed when the float is dry and open when the float becomes sub-

mersed. This operation is typical for indicating a low level.

LC40 Series Controller

INVERINVERT +/- +/-

LALATCHTCH

DELAY

GND

Input 1A

(+)

(-)

115 VAC

220 VAC

t 1

Input 1B

(+)

(-)

Black

White

Black

Red

White

Power

Supply

Black

White

Power

Supply

Black

Red

Power

Supply

Black

Red

Power

Supply

Black

STANDARD

CONTROLLER

RELAY 1 RELAY 2

POWER

INPUT 1 INPUT 2A INPUT 2B

INVERT

DELAY

INVERT

DELAY

LATCH

OFF

Black

White

Black

Red

1 2 3 4 5 6

Kommentare zu diesen Handbüchern

Keine Kommentare

Flowline LV10 Switch-Tek Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Flowline LV10 Switch-Tek